Showing posts with label aviation snips. Show all posts
Showing posts with label aviation snips. Show all posts

Monday, July 10, 2017

How to Make a Round Canvas Frame

Fig.1 Wire 
Aviation Snips
By Gary Boutin

Tools and Supplies:
Aviation Metal Snips
Butt Splices 10 A.W.G. Clear
Canvas cloth
Chain Link Wire gauge #9
Hacksaw
Heavy Needle (Curve is better)
Heavy waxed thread Metal wire
Paper clips (large)
Scissors (cloth)

In the past all my canvas rectangular frames were made of 2x4-wood with metal L-brackets. This project goal is to create a round canvas using fencing wire. A novel approach to artwork. If you shop for a round frames, or a round canvas there are none. You can purchase oval canvas and oval wood or plastic frames. This round frame and canvas could be used to highlight a special painting. 

This post shows the eleven steps on how to make a oval canvas. 

Step 1: Fig.1 shows the tool that will cut the fence wire. This wire was purchased from the Home Depot. Fig.2 shows chain link wire gauge #9 that will be the back bone for this canvas.

Fig.2 Chain Link 
Wire gauge #9
Step 2: #9 gauge wire 50 feet cost $10.98 before taxes. This canvas has a circumference of 12 inches (304.8 mm)
Fig.3 Canvas Frame
Step 3: Fig.4 and fig.5 shows the type of canvas needs to be chosen. Below this is heavy canvas purchased at a local linen store.
Fig.4 Heavy Canvas
Fig.5 Laying the Canvas
Step 4: Fig.6 shows the wire on the canvas. Choose the canvas diameter. Fig.7 shows its not that easy.
Fig.6 Wire on canvas
Fig.7 Pull enough wire
Step 5: Once the circumference has been measured, 37-inches (939.8 mm) cut the wire with aviation snips. It can be difficult to cut this wire, use a hacksaw if your cutter will not cut the chain link wire.
Fig.8 Cut the wire
Fig.9 Use Aviation Snips
Step 6: Fig.10 shows a #10 Butt splice used to pull the ends together.

Fig.10 Butt Splice
Step 7: Fig.11 shows the metal circle on the pre-cut canvas. Try to get the wire to be in a circle. It does spring back and the spring can be difficult. Fig.12 shows that paper clips were used to get the edges around the frame.
Fig.11 Wire on canvas
Fig.12 Paper Clips
Step 8: Fig.13 shows the use heavy waxed thread with a strong needle and thread around the circle. Not having done much sewing this was also a joy to do. Fig.14 shows a heavy needle. Fig.15 shows to thread around in a circle. The Gesso will tighten the canvas, this is just to keep it on the frame.
Fig.13 Heavy Waxed Thread
Fig.14 Heavy Needle
Fig.15 Thread the circle
Step 9: Fig.16 shows that the canvas is stretched tightly. Tighten the waxed thread. Fig.17 shows the canvas is ready to be painted. Not a complete circle but this is a first attempt.
Fig.16 Tighten the canvas
Step 10: Finished. Now its time to paint the dry canvas with Gesso paint and then the canvas is ready to be painted.

Fig.17 Finished
Step 11:  Tabulation; Wire cost: 1.50, linen canvas cost: $2. This frame was made for $2.50 and its round and unusual.

  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.
 
Note: Light in Dark Artwork assumes no liability for omissions, errors or the outcome of any Artist projects. All rights reserved. © Copyright 2011-

Sunday, September 4, 2016

Home Made Brush Holder with all Plastic Parts - Part 1 of 6 - The Parts and Tools


This is the standard painter brush holder and cleaner
Fig.1 Brush holder
and cleaner
By Gary Boutin

Tools and Supplies:
Aviation metal Snips
Brushes Long Handle
Cordless 12-volt Drill with drilling bits (Ryobi ) 
DAP Kwik Seal Silicone Caulking
Drill Bit (Ryobi Drill Bits) 
Electrical Ties (small)
Gloves Nitrile
Metal Hardware Cloth
Paper (for template)
Pencil or Marker
Plastic Container 1-Gallon (old joint compound tub)
Plastic Fencing  (Poultry Netting)
Strong Scissors
Westpack Material All Purpose Tub

There plenty of ways to spend money on art. This post is all about saving money and spending it on paint. We need the extra accessories and many do purchase them like Fig.1 above right. This is an upcycling project.

This post shows the twelve steps on the assembly of a simple brush holder. 

Step 1: Find an empty wide bottom plastic container. Fig.2 shows the container below is from Westpack Material All Purpose Joint Compound. One gallon plastic buckets can be purchased at hardware stores for about $3 each. The choice is white, black and sometimes blue. Small container can also be purchased with lids.
This is a Westpack Material all purpose joint compound empty bucket
Fig.2 Plastic bucket
Step 2: Find or purchase plastic fencing. Fig.3 shows the plastic poultry netting. You can also use plastic netting. Just make sure the net has wide enough area for the brushes.
This poultry plastic netting is what was used to keep brushed standing up
Fig.3 Poultry Netting
Step 3: Fig.4 shows Ryobi Titanium Drill Set. Use a drill bit larger then the electrical ties.
These Titanium drills were purchased at The Home Depot
Fig.4 Ryobi 
Titanium Drill Set

Step 4: Fig.5 shows Ryobi 12 volt cordless drill with Makita drill bit holder.
12 Volt Cordless Drill with Makita Bit Holder
Fig.5 Ryobi 12-volt
Cordless Drill
Step 5: Fig.5 shows the use of a measurement tape to measure each top and bottom of the bucket.
Metal measurement tape
Fig.6 Tape

 Step 6: Fig.7 shows the Aviation Snips that will cut the plastic netting.
Aviation metal snitp is what is used to cut just about anything
Fig.7 Aviation Snips
Step 7: Fig.8 shows pliers will be needed to pull the electrical ties.
Standard pliers
Fig.8 Pliers
Step 8: Manual caulking gun used to finish the Bucket.
This is a well used manual caulking gun
Fig.9 Caulking
Step 9: Fig.10 shows the Long Brushes from your inventory that are placed for safe keeping.
These brushed need a new home, the brush holder
Fig.10 Art Brushes
Home Made Brush Holder with all Plastic Parts:
Other post that are brush containers:



  • Cookie Alert: European Union laws requires that you know that this blog uses cookies. If you are concerned about this please click here to see how Google uses this information.

 
Note: Light in Dark Artwork assumes no liability for omissions, errors or the outcome of any Artist projects. All rights reserved. © Copyright 2011-